In Stock
Solinst Levelogger Edge

Solinst Levelogger Edge

  • UK's No.1 Most Popular Water Level Logger Best in class Levelogger with ranges 0-2m and 0-200m.

  • Robust and Corrosion Resistant Hastelloy pressure sensor and Titanium based PVD coating

  • IN STOCK All ranges kept in stock. Next Day Shipping

  • Built-in Datalogger Memory capacity for up to 120,000 data points

The Levelogger Edge Water Level Datalogger has enhanced features which definitely gives it an “edge” over previous Levelogger versions.

It is an automatic absolute water level logger which records water level and temperature to a high accuracy. The Edge water level dataloggers has infra-red data transfer and an industry leading 10 year (1-minute intervals) battery life. Deployment can be with either a Direct Read Cable, wireline or Kevlar cord. The Levelogger Edge water level datalogger has a memory capacity to store up to 120,000 water level and temperature data points

The Edge Levelogger features the new Hastelloy® pressure sensor and Titanium based PVD coating which provide improved stability and reliability, increased corrosion resistance in harsh environments, as well as improved stability of readings in extreme pressure and temperature conditions. It also has a wider temperature compensated pressure range (0 to 50°C, -10 to 50°C for Barologger Edge), and improved thermal response time. The sensor, built from Hastelloy, can withstand 2 times over-pressure without permanent damage.

A new version of software, Version 4.0, has been written to support the Levelogger Edge, Levelogger Junior, LTC Levelogger Junior, Rainlogger and Leveloader. Version 4.0 provides new features, including the ability to compensate for barometric pressure on multiple Levelogger data files simultaneously. It makes programming data loggers and viewing data easier. More useful programming options are now available including compressed and repeat sampling, and a future stop option. Downloading data is now faster, due to the increased communication speed between the Levelogger Edge datalogger and the PC with the new Optical Reader.

Manufactured by: Solinst
Model: Solinst Levelogger Edge

Services offered for this product

  • Sales
  • Rental
  • Installation
  • Calibration
  • Maintenance


  • Aquifer characterization: pumping tests, slug tests, etc
  • Mine water and landfill leachate management
  • Stream gauging, lake and reservoir monitoring
  • Watershed, drainage basin and recharge monitoring
  • Wetlands and stormwater run-off monitoring
  • Harbour and tidal fluctuation measurement
  • Long-term water level monitoring in wells, surface water bodies and seawater environments
  • Water supply and tank level measurement
Level Sensor Piezoresistive Silicon with Hastelloy Sensor
Accuracy ±0.05% FS (Barolgger Edge: ± 0.05 kPa
Stability of Readings Superior, low noise
Units of Measure m, cm, ft., psi, kPa, mBar, °C. °F (Barologger Edge: psi, kPa, mBar, °C, °F)
Resolution 24 Bit Resolution
Normalisation Automatic Temperature Compensation
Temp. Comp. Range 0° to 50°C (Barologger Edge: -10 to +50°C)
Temperature Sensor Platinum Resistance Temperature Detector
Temp. Sensor Accuracy ± 0.05°C
Temp. Sensor Resolution 0.003°C
Battery Life 10 Years - based on 1 reading/minute
Clock Accuracy ± 1 minute/year (-20°C to 80°C)
Operating Temperature -20°C to 80°C
Maximum # Readings 40,000 readings FRAM memory, or up to 120,000 using linear data compression
Memory Slate and Continuous
Communication Optical Infrared Interface. Conversion to RS-232, USB, SDI-12. Serial at 19,200 bps, 38,400 bps with USB
Size 7/8" x 6.25" (22 mm x 159 mm)
Weight 4.6 oz. (129 grams)
Corrosion Resistance Titanium based PVD coating
Other Wetted Materials Delrin, Viton, 316L stainless steel, Hastelloy, Titanium based PVD coating
Sampling Modes Linear, Event & User-Selectable with Repeat Mode, Future Start, Future Stop, Real-Time View
Measurement Rates 1/8 sec to 99 hrs
Barometric Compensation Software Wizard and one Barologger in local area (approx. 20 miles/30 km radius)
Models Full Scale (FS) Accuracy (Typical)
Barologger Air only ± 0.05 kPa
F15, M5 16.4 ft., 5 m ± 0.010 ft., 0.3 cm
F30, M10 32.8 ft., 10 m ± 0.016 ft., 0.5 cm
F65, M20 65.6 ft., 20 m ± 0.032 ft., 1 cm
F100, M30 98.4 ft., 30 m ±0.064 ft., 1.5 cm
F300, M100 328.1 ft., 100 m ± 0.164 ft., 5 cm

Files and software available to download:

Quick Start Guide
Edge vs Gold Comparison

Solinst Barologger Edge Barometric Datalogger

The Barologger Edge is the most accurate datalogger for the compensation of Solinst water level dataloggers such as the Levelogger Edge, Junior and LTC.

View product page

Solinst Levelogger Optical Reader

RS Hydro stock the Solinst Levelogger Optical Reader which enables communication with your levelogger.

View product page

Solinst Levelogger Direct Read Cable

RS Hydro supply the Solinst Direct Read Cable to enable real-time data and communication with Leveloggers without the need removal from the water.

View product page

Solinst Levelogger App and Interface

RS Hydro are proud to be UK and Ireland distributors for the NEW Solinst Levelogger App and Levelogger App Interface. Using dataloggers in the field will never be the same again once you use this new technology.

View product page

Solinst Model 3001 DataGrabber

The 3001 DataGrabber, from Solinst, provides a low cost, portable solution for Levelogger users to download data directly to a USB flash drive key.

View product page

3001 BioFoul Screen

The 3001 Bio-Foul Screen is the perfect screen for extending the deployment time of Levelogger Edge, Levelogger Junior Edge and the LTC Levelogger Junior, it is espically for coastal and saltwater environments.

View product page

Solinst Levelogger PC Interface Cable

The Solinst levelogger PC Interface Cable is for the purpose of transfer of data in the field.

View product page

Kevlar Cord

Solinst Kevlar cord is available in 50ft, 100ft, 200ft, 300ft and 500ft.

View product page